Fibaro Smart Implant

FIBARO Smart Implant allows to enhance the functionality of wired sensors and other devices by adding Z-Wave network communication.
You can connect binary sensors, analog sensors, DS18B20 temperature sensors or DHT22 humidity and temperature sensor to report their readings to the Z-Wave controller.
It can also control devices by opening/closing output contacts independently of the inputs.

This product works with :

• Fibaro Home Controller 2/Lite

Please note:

Before installation

Connect only in accordance with one of the diagrams,
The device is powered with secure voltage; nevertheless, the user should be extra careful or should commission the installation to a qualified person,
Do not connect devices which are not compliant with the specification,
Do not connect other sensors than DS18B20 or DHT22 to SP and SD terminals,
Do not connect sensors to SP and SD terminals with wires longer than 3 meters,
Do not load the device outputs with a current exceeding 150mA,
Every connected device should be compliant with the relevant safety standards,
Unused lines should be left insulated.

Contact us for a supply & installed quote

• Controlled with FIBARO system devices or any Z-Wave controller
• Compatible with regular and parametric alarm lines (can be connected to 2 alarm detectors)
• Can be fitted into a standard alarm PIR to convert it to a Z-Wave PIR
• Compatible with binary sensors (can be connected to 2 binary outputs)
• Compatible with DS18B20 temperature sensors (can be connected to four DS18B20 temperature sensors)

Supply voltage: 9-30v DC ±10%

Input: 2 potential-free inputs, 1 digital input 1-wire

Output: 2 potential-free outputs

Maximum current carrying capacity of outputs: 150mA

Maximum voltage at output contacts: 36v DC / 24v AC ±5%

Operating temperature: 0 – 40 °C

Number of servicing temperature sensors: 4

Measurement range: -55 °C – +126 °C

Radio protocol: Z-Wave

Radio frequency: 921.42Mhz – AU/NZ

Range: up to 30 m in buildings (depending on the construction materials) up to 50 m in the field

Dimensions: (L x W x H) 14.5 x 27.3 x 12 mm